Home / Tag / MWI


Setting up shared voicemail on Asterisk – part 2

March 31, 2011

Part 1 laid the foundations for creating and accessing a shared voicemail box. In this, part 2, I explain how the lamp on the BLF key is switched on and off to show there are messages waiting in the shared box. Note that this is separate from any existing MWI lamp used for personal voicemail. […]

Read the full article →

Setting up shared voicemail on Asterisk – part 1

March 23, 2011

It’s a requirement that people often seem to ask for – a single voicemail box, taking messages for a department, that can be easily monitored and accessed by several different users. A typical application would be to record out-of-hours messages which are then checked in the morning by any of a number of users, perhaps just depending who […]

Read the full article →

Using Custom Device States to control BLF lamps

February 17, 2011

Do you want to know how to use a custom device state to control the lamp on a programmable key of an IP phone? In this article I explain how to set up the hints and make any number of IP phones subscribe to a custom device state and how to switch the custom status from within the Asterisk dial plan. […]

Read the full article →

SIP Subscribe/Notify and Asterisk Hints Explained

March 6, 2009

The SIP SUBSCRIBE/NOTIFY mechanism – what it is and how it works The SIP protocol includes a standardised mechanism to allow any SIP client (an IP phone being an example of a SIP client) to monitor the state of another device. Details are provided in the SIP protocol document RFC 3265. Basically, it works like […]

Read the full article →